Inputs
(2) 75Ω DVB-ASI inputs
(2) Gigabit Ethernet ports for IP input, supporting the following protocols:
– UDP unicast/multicast
– RTP unicast/multicast with optional SMPTE-2022 FEC
– HTTP Live Streaming
– RTMP (Server or Client; limited to H.264 only)
– RIST for contribution over the Internet
Optional SMPTE-2110 baseband video over IP turnaround (Future release availability)
Outputs
(2) SDI outputs each supporting 12G-SDI, 3G-SDI, HD-SDI and SD-SDI
(2) SDI outputs each supporting 3G-SDI, HD-SDI and SD-SDI
Support for all standard frame rates (interlaced and progressive):
23.98, 24, 25, 29.97, 30, 50, 59.94, 60
Video Post-Processing
Support for up/down/cross conversion of output video (independent of incoming stream) (Future release availability)
Conversion between interlaced and progressive
Frame rate conversion
High Dynamic Range (HDR) support (Future release availability)
Built-in Genlock support (Future release availability)
Video Decoding
Decoding Standards:
– MPEG-2
– MPEG-4 AVC (H.264)
– HEVC (H.265)
Support for up to two independent 1080p60 decode sessions
Support for UHD decoding in AVC and HEVC modes (Maximum resolution 3840x2160p60)
Support for 4:2:0 and 4:2:2 (option) color spaces in all modes
Support for 8-bit / 10-bit decoding in all modes
Low Latency decoding supported
Audio Decoding
Decoding Standards:
– MPEG-1 Layer II
– AAC-LC
– HE-AAC (v1/v2)
– Dolby AC-3
– Dolby EAC-3
– LPCM (SMPTE-302M)
– Dolby AC-3/EAC-3 pass-thru support
(5.1-Surround encoding available for AAC-LC, HE-AAC, Dolby AC-3 and Dolby EAC-3; subject to
licensing)
Maximum number of channels supported (subject to licensing):
– MPEG-1 Layer II: 16 stereo pairs (32 audio channels)
– Dolby AC-3: 16 stereo pairs (32 audio channels)
– Dolby EAC-3: 8 stereo pairs (16 audio channels)
– AAC-LC: 8 stereo pairs (16 audio channels)
– HE-AAC (v1/v2): 8 stereo pairs (16 audio channels)
Optional support for 5.1 Surround Sound encoding, in AAC and Dolby modes.
Optional audio module increases the capacity to 32 stereo pairs (64 audio channels), allowing full 16-channel support for the four HD inputs, in all compression modes (Future release availability).
Ancillary Data Support
Closed-Captioning: SMPTE-334M (EIA-608 and EIA-708 supported), Line 21 (SD sources)
OP-47/SMPTE RDD-08 teletext subtitles (Future release availability)
AFD: SMPTE-2016, Line 20/22 WSS (SD sources)
SCTE-104 to SCTE-35 conversion
SMPTE-2038 generic ancillary data transport (timecode, KLV, etc.)
Software Licensable Options —
+DEC-2.0 Dolby Digital/Dolby Digital Plus stereo audio decoding license
+DEC-5.1 Dolby Digital/Dolby Digital Plus 5.1 Surround Sound audio decoding license
+MP1L2-AAC-DEC MPEG-1 Layer II, AAC-LC, and HE-AAC audio decoding per pair. Three AAC licenses
can be combined to allow one 5.1 surround decode.
+FEC Add SMPTE-2022 support (per unit)
+422 4:2:2 decoding support (per unit)
+RIST/ARQ-DEC RIST RTP/ARQ support (per unit)
+DEC-RTMP-SVR RTMP Server Mode software option
Hardware Optional Features (Factory-Installed on New Product) —
–9992DEC-IP-2110 SMPTE-2110 input / output module expansion (Future release availability)
–9992DEC-AUD Additional audio processor module equipped with a full set of MPEG-1 Layer II and
AAC licenses (Future release availability)
Ordering Information
Note: For Software Options and Upgrades, as well as Hardware Options, please see the respective Options sections listed above.
9992-DEC-4K-HEVC 4K/AVC/MPEG-2 Software Defined Broadcast Decoder with Single-Channel 4K or Dual-Channel 2K Video Paths
Rear I/O Modules
RM20-9992-DEC-B-HDBNC 20-Slot Frame Rear I/O Module (Standard-Width) (2) ASI Input BNCs, (2) GigE Ethernet Media Ports, (2) 12G/6G/3G/HD-SD-SDI Coaxial Outputs, (2) 3G/HD/SD-SDI Coaxial Outputs, (4) Output Copy Coaxial Outputs, COMM/GPIO Port (All SDI coaxial connectors HD-BNC.)