ROYAL 9915DA-4×16-XPT-12G

12G/6G/3G/HD/SD Quad-Channel Multi-Rate Reclocking DA with x4 Output Crosspoint supports four input channels which can be crosspoint-routed to up to 16 DA outputs

CDI_9915DA-4ksol_sml

Product by: Cobalt Digital

The Cobalt® 9915DA-4×16-XPT-12G 12G/6G/3G/HD/SD Quad-Channel Multi-Rate Reclocking DA with x4 Output Crosspoint supports four input channels which can be crosspoint-routed to up to 16 DA outputs.

As demand for 4K continues to rise, distribution of 12G-SDI signals within a rackspace becomes increasingly important. The 9915DA allows for copper runs of up to 45 meters, reaching most equipment within a rack room or truck. For longer runs, the optional optical inputs and outputs allow the 9915DA to connect distribution from zones of much greater distances.

The extremely flexible crosspoint (which is user-configurable via DashBoardTM GUI remote control) allows quad 1×4, dual 1×8, single 1×16 and other routing possibilities. Any of the four input channels can be distributed or duplicated across four groups of 1×4 DAs. The quad-input capacity provides a one-card solution for distribution of 8K quad-link content over 12G-SDI interfaces. A failover function allows going to secondary backup inputs should the primary input lose lock.

Up to 10 of the 9915DA-4×16-XPT-12G cards can be installed in a frame to provide 40 channels of input, with distribution to up to 160 outputs. Full user DashBoard™ or Remote Control Panel remote control allows full status and control access locally or across a standard Ethernet network.



FEATURES:
  • Flexible output crosspoint allows card to function as quad-channel 1×4, dual-channel 1×8, single-channel 1×16, or other numerous routings with reclocking DA
  • Full support of 12G/6G/3G/HD/SD-SDI and ASI/DVB
  • Input data rate auto-detection for all industry-standard data rates
  • Added fiber inputs/outputs via optional SFPs
  • One-card solution for distribution of 4K/8K content over 12G-SDI interfaces
  • Failover provides backup to selected secondary inputs if primary input loses lock, Available for both coax and (optional) fiber inputs.
  • Card display and DashBoard status input lock indicators
  • Hot-swappable
  • Five year warranty


OPTIONS:
  • -DA-SFP  Adds daughter card to support two externally-accessible SFP cages to the 9915DA-4×16-XPT-12G card
  • -SFP-OE-12G SFP Optical UHD Single Receiver
  • -SFP-2OE-12G SFP Optical UHD Dual Receiver
  • -SFP-EO-12G SFP Optical UHD Single Transmitter
  • -SFP-2EO-12G SFP Optical UHD Dual Transmitter
  • -SFP-EOOE-12G SFP Optical UHD Transceiver
  • -SFP-OE SFP Optical Single Receiver
  • -SFP-2OE SFP Optical Dual Receiver
  • -SFP-EO SFP Optical Single Transmitter
  • -SFP-2EO SFP Optical Dual Transmitter
  • -SFP-EOOE SFP Optical Transceiver
  • -SFP-H-TO-S SFP HDMI-to-HD/SD-SDI Receiver
  • -SFP-S-TO-H SFP HD/SD-SDI-to-HDMI Transmitter
  • -SFP-EO-CWDM SFP Optical Single CWDM Transmitter (see Ordering Info for wavelengths and corresponding ordering codes)
  • -SFP-2EO-CWDM    SFP Optical Dual CWDM Transmitter (see Ordering Info for wavelengths and corresponding ordering codes)
  • Note: All specifications are preliminary and subject to change. Inputs/outputs are a function of rear I/O module used. Fiber specifications are typical, and only applicable for card fitted with optional Tx or Rx (as applicable) fiber SFP module.


SPECIFICATIONS:

Power <10  Watts

12G / 6G / 3G / 1.5G / 270M Serial Digital Interface Input/Output (4) 75Ω HDBNC Connectors Input (max). (16) 75Ω HDBNC Connectors Output (max). SDI Formats Supported: SMPTE ST2082-1,10, 424M, 292M, SMPTE 259M-C. All inputs/outputs 12G compliant and SDQS/2SI quad 3G compliant.

Fiber Transmit Output (typ. with optional fiber Tx SFP) LC connector Fiber Wavelength, Tx: 1310 nm Tx Power: -5.0 dBm (min)

Fiber Receive Input (typ. with optional fiber Rx SFP) LC connector Receive Sensitivity: -23 dBm; 1260 to 1620 nm

REAR MODULE:

RM20-9915-A-HDBNC

  • (4) SDI In (SDI IN A thru SDI IN D)
  • (16) SDI Out
  • (2) SFP cage access
  • Note: Rear module has factory-installed SFP module receptacles on rear module. Plug-in SFP functionality is available with option -DA-SFP (SFP support daughtercard) and -SFP plug-in module options. (See Ordering Information.) All coaxial connectors HD-BNC.
  • Note: SFP modules, when inserted into rear module SFP receptacles, can dimensionally extend past the right “boundary” of the rear module. In rare cases, this can present interference issues if a rear module to the right of SFP rear module also has adjacent large-footprint connectors that can extend across the rear module boundary. Plan frame buildout accordingly in these cases.


ORDERING INFORMATION:

Rear Module:

  • RM20-9915-A-HDBNC  20-Slot Frame Rear I/O Module (Standard Width) (4) 12G/6G/3G/HD/SD-SDI Inputs, (16) 12G/6G/3G/HD/SD-SDI Outputs (all coaxial connectors HD-BNC)


Options (Hardware-based):
  • -DA-SFP  Adds daughter card to support two externally-accessible SFP cages to the 9915DA-4×16-XPT-12G card
  • -SFP-OE-12G  12G/6G/3G/HD/SD-SDI UHD Single Receiver SFP Module; 1260 nm – 1620 nm; type LC connector
  • -SFP-2OE-12G  12G/6G/3G/HD/SD-SDI UHD Dual Receiver SFP Module; 1260 nm – 1620 nm; type LC connector
  • -SFP-EO-12G  12G/6G/3G/HD/SD-SDI UHD Single Transmitter SFP Module; 1310 nm; type LC connector
  • -SFP-2EO-12G  12G/6G/3G/HD/SD-SDI UHD Dual Transmitter SFP Module; 1310 nm; type LC connector
  • -SFP-EOOE-12G  12G/6G/3G/HD/SD-SDI UHD Transceiver SFP Module; 1310 nm Tx / 1260 nm – 1620 nm Rx; type LC connector
  • -SFP-OE  3G/HD/SD-SDI  Single Receiever SFP Module; 1260 nm – 1620 nm; type LC connector
  • -SFP-2OE   3G/HD/SD-SDI  Dual Receiver SFP Module; 1260 nm – 1620 nm; type LC connectors
  • -SFP-EO  3G/HD/SD-SDI  Single Transmitter SFP Module; 1310 nm; type LC connector
  • -SFP-2EO  3G/HD/SD-SDI  Dual Transmitter SFP Module; 1310 nm; type LC connectors
  • -SFP-EOOE  3G/HD/SD-SDI  Transceiver SFP Module; 1260 nm – 1620 nm; type LC connectors
  • -SFP-H-TO-S  HDMI-to-HD/SD-SDI Receiver SFP Module
  • -SFP-S-TO-H   SFP HD/SD-SDI-to-HDMI Transmitter SFP Module
  • -SFP-EO-CWDM   Single CWDM Transmitter SFP Module; type LC connector
  • -SFP-2EO-CWDM   Dual CWDM Transmitter SFP Module; type LC connectors
  • Use fiber wavelength codes below for CWDM SFPs when ordering. Available wavelengths (in nm) are as follows: 1270, 1290, 1310, 1330, 1350, 1370, 1390, 1410, 1430, 1450, 1470, 1490, 1510, 1530, 1550, 1570, 1590, 1610.
  • In “WX” places in part number, substitute code for wavelengths in each place as listed below:
  • -27: 1270nm  -29: 1290nm  -31: 1310nm -33: 1330nm  -35: 1350nm  -37: 1370nm -39: 1390nm  -41: 1410nm  -43: 1430nm -45: 1450nm  -47: 1470nm  -49: 1490nm -51: 1510nm  -53: 1530nm  -55: 1550nm -57: 1570nm  -59: 1590nm  -61: 1610nm (Example: -SFP-EO-CWDM-27 has 1270 nm Tx wavelength)
Read more
Questions about this Product?

Send us a note and we’ll get back to you as soon as possible!

Phone: 217-344-1243
Email: sales@cobaltdigital.com
2506 Galen Drive, Champaign, IL 61821