Data Solutions

GPI-100 Remote GPI VANC Transmission

The GPI-100 enables GPI/O triggers to be carried in the Vertical Ancillary (VANC) data area of an SDI (SMPTE 259M) or HD SDI (SMPTE 292M) video signal, in accordance with SMPTE 291 and other related standards. The GPI-100, as an encoder, reads GPI/O inputs and inserts them into the VANC. As a decoder, it reads the VANC and applies the data to GPI/O outputs. This allows GPI/O enabled equipment to be triggered remotely through the video path.

The GPI-100 provides a simple interface allowing the carriage of GPI/O triggers as part of the video signal. For example:

  • The card is set to act as an encoder or a decoder. This determines if the card will read and place the GPI/Os into the VANC (encode) or read the VANC and assert the GPI/Os (decode).
  • GPI/O triggers are logged both to the screen and to a log file. The log file can be transferred from the card to the PC.
  • Entries in the log file are time stamped. The GPI-100 can be set to use an NTP time server, timecode or its own internal clock as its time reference.
  • One GPI-100 can insert trigger for many GPI-100s acting as receivers. There are 8 GPIOs available and a receiver can act on all or some of them.


    Product by:
    Author

    Ross Video Ross Video designs, manufactures and supports a wide range of innovative products for use in video production applications. Ross products are installed in over 100 countries around the world, where they are used daily by top broadcasters, production companies, sports stadiums, government agencies and houses of worship. Visit rossvideo.com