Questions about this Product?
Send us a note and we’ll get back to you as soon as possible!
9910DA-4Q-3G-RCK
Quad-Channel Multi-Rate Reclocking DA with x4 Output Crosspoint
Product by: Cobalt Digital
The Cobalt® 9910DA-4Q-3G-RCK 3G/HD/SD Quad-Channel Multi-Rate Reclocking DA with x4 Output Crosspoint supports four input channels which can be crosspoint-routed to any of 16 DA outputs. The 9910DA-4Q-3G-RCK is multi-rate with user enable/disable reclocking, and supports SDI and ASI/DVB on all inputs and outputs with non-inverting outputs. The quad-input capacity provides a one-card solution for distribution of 4K quadrant-division content over 3G/HD/SD-SDI interfaces.
The extremely flexible crosspoint (which is user-configurable via DashBoard™ GUI remote control) allows quad 1×4, dual 1×8, single 1×16 and other routing possibilities. Any of the four input channels can be distributed or duplicated across four groups of 1×4 DAs, and any of the four inputs can be set to use an alternate failover input upon loss of signal.
Excellent receive performance allows receive EQ for up to 120m 3G and 160m HD cable length (1694A). Card edge and DashBoard™ remote status monitoring indicates input lock for each input channel. Up to 10 of the 9910DA-4Q-3G-RCK cards can be installed in a frame to provide 40 channels of input, with distribution to up to 160 outputs.
Full user DashBoard™ or Remote Control Panel remote control allows full status and control access locally or across a standard Ethernet network.
Features
-
Full support of 3G/HD/SD-SDI and ASI/DVB
-
Reclocking can be enabled or disabled for each input channel
-
One-card solution for distribution of 4K quadrant-division content over 3G/HD/SD-SDI interfaces
-
Excellent receive performance – EQ allows 1694A cable lengths up to 120m (3G) / 160m (HD) / 400m (SD)
-
Flexible output crosspoint allows card to function as quad-channel 1×4, dual-channel 1×8, or single-channel 1×16 reclocking DA
-
Failsafe mode automatically switches to selected secondary input on loss of primary input
-
Input data rate auto-detection for all industry-standard data rates
-
All outputs are non-inverting – ASI can be outputted on any output
-
Card edge and DashBoard™ status and individual input lock indicators
-
Five year warranty
Specifications
Power
< 3 Watts
3G/HD/SD-SDI / ASI Inputs
(4) 75Ω BNC inputs (A thru D)
SDI Formats Supported: SMPTE 259M, SMPTE 292M,
SMPTE 424M
SDI Return Loss: >15 dB up to 1.485 GHz; >10 dB up to
2.970 GHz
Receive Performance (Cable Length; Belden 1694A)
3 Gbps: 120m
1.485 Gbps: 160m
143-360 Mbps: 400m
3G/HD/SD-SDI / ASI Outputs
(4×4) 75Ω BNC outputs (16 total). Each group of 4 outputs
can be crosspoint connected to inputs A thru D.
Signal Level: 800 mV nominal
Return Loss: >15 dB at 5 MHz – 1.485 GHz
Jitter (wideband): HD < 0.2 UI
Ordering Information
9910DA-4Q-3G-RCK 3G/HD/SD Quad-Channel Multi-Rate Reclocking DA with x4 Output Crosspoint
Rear Modules:
RM20-9910-4Q-A 20-Slot Frame Rear I/O Module (Standard Width) (2) 3G/HD/SD-SDI Input BNC, (8) 3G/HD/SD-SDI Output BNCs
RM20-9910-4Q-B-DIN 20-Slot Frame Rear I/O Module (Standard Width) (4) 3G/HD/SD-SDI Inputs, (16) 3G/HD/SD-SDI Outputs (DIN 1.0/2.3) (High Density)
RM20-9910-4Q-B-HDBNC 20-Slot Frame Rear I/O Module (Standard Width) (4) 3G/HD/SD-SDI Inputs, (16) 3G/HD/SD-SDI Outputs (HDBNC) (High Density)
RM20-9910-4Q-C 20-Slot Frame Rear I/O Module (Standard Width) (3) 3G/HD/SD-SDI Input BNC, (7) 3G/HD/SD-SDI Output BNCs
RM20-9910-4Q-D 20-Slot Frame Rear I/O Module (Standard Width) (1) 3G/HD/SD-SDI Input BNC, (9) 3G/HD/SD-SDI Output BNCs
RM20-9910-4Q-E 20-Slot Frame Rear I/O Module (Double Width) (4) 3G/HD/SD-SDI Input BNC, (16) 3G/HD/SD-SDI Output BNCs
