9021

Standard Definition A/D (Composite, Y/C, or Component Input) to 10-bit SD-SDI

Product by: Cobalt Digital

  • Overview
  • Flow Diagrams
  • Rear Module

The 9021 provides 10-bit analog-to-SDI conversion for NTSC and PAL SD conversions.  When used with an “-A/S” (split) rear module, the space-saving design of the 9021 provides for high density, allowing two cards to be collocated in the same frame space normally occupied by a single card. The 9021 accepts composite, Y/C and component YPbPr analog input signals and provides an SMPTE 259M-C 270 Mbps SDI output. Differential inputs are included for common mode noise rejection. A 4-, 3-, or 2-line comb or notch filter is user-configurable for Y/C separation in composite mode.  All modes have 2X 8:4:4 input oversampling.  An output jitter VCXO reduces 270 Mbps jitter down to 2 Hz.  Full video proc control with user memory allows adjustment of white level, black level, color gain, and color phase.

Features

  • Composite, component YPbPr and Y/C inputs

  • Supports component BetaCam™, MII™  and SMPTE/N10

  • Differential analog video inputs for power hum rejection

  • 10-bit A to D and digital video path

  • User selectable (on/off) 75-ohm termination

  • 4 or 3-line adaptive comb filter for composite mode

  • Seven 270 Mbit SDI outputs

  • Internal color bar generator

  • User processing configuration control

  • Manual or automatic input gain control

  • Remote control/monitoring via Dashboard ™ software or OGCP-9000 remote control panels

  • Five year warranty

Specifications

Electrical 
Power: 7 watts

Input 
SD Composite, Y/C or Component (YPbPr);
differential

SD-SDI Outputs-Outputs 
Number of Outputs: 7
Standard: SMPTE 259M-C

Analog Gain 
Auto or manual mode

Output Jitter 
< 0.14 UI measured with color bar input

A/D Process 
8:4:4 2X over sampled

Frequency Response 
5 MHz ± 0.25 dB

SNR 
> 52 dB

Comb Filter 
4, 3 or 2-line adaptive / non-adaptive User selectable

Ordering Information

9021  Standard Definition A/D (Composite, Y/C, or Component Input) to 10-bit SD-SDI

RM20-9021-A  20-Slot Frame Rear I/O Module (Standard Width) Composite, Component and Y/C BNC Inputs, 7 Converted SDI Output BNCs

RM20-9021-A/S  20-Slot Frame Rear I/O Module (Split; supports 2 cards) Composite In BNC, 4 SDI Output BNCs (connections are per card)

RM20-9021-B/S-HDBNC  20-Slot Frame Rear I/O Module (Split, supports 2 cards) Composite, Component and Y/C Inputs, 7 SDI Outputs (connections are per card; all connectors are HD-BNC)

RM20-9021-B/S-DIN  20-Slot Frame Rear I/O Module (Split, supports 2 cards) Composite, Component and Y/C Inputs, 7 SDI Outputs (connections are per card; all connectors are DIN1.0/2.3) 

Questions about this Product?

Send us a note and we’ll get back to you as soon as possible!

Phone: 217-344-1243
Email: sales@cobaltdigital.com
2506 Galen Drive, Champaign, IL 61821